1. 斉藤光学製作所 >
  2. English >
  3. CONTRACT PROCESSING

Contract Processing

1

High Accuracy, High Quality and Acceptance of Small Lots

We have an esteemed reputation for achieving ultimate preciseness of submicron orders and surface smoothness at an atom-level.

2

Capable of Preparing Material (if requested)

We can arrange material such as glass and sapphire before processing, as well as processing supplied material.

3

We put full effort on Processing Resistant Material

We will try our best on materials which have been turned down by other companies, as our strengths as a company is having several methods of processing.

  • Capability of achieving high-quality, high flatness on both sides of the board
  • Prototype processing (1 piece~) ~ medium size in lots (~ x000/month) *depends on material
  • From procurement of material, we will take care of every single step of your product
  • Capability of processing material thinner than 100μm
  • Capability of processing a variety of materials (e.g. Advanced crystal material, metals, rubber etc.)

PROCESSING TECHNOLOGY

Cutting We are capable of precisely cutting material by multi-wire/single-wire saws, and also process cutting glass material.
Max. cutting ingot size is, 150mm in diameter  x 150mm in length
Grinding We are capable of precisely applying the final touch for squint basal plates (diameter; few mm~ 100mm)
Heat Treating We can apply heat treating for removing processing-distortions(~1800℃)
Polishing We will utilize the most ideal polishing method out of a variety of procedures such as lapping, machine polishing (MP), chemical machine polishing (CMP) and so on. Whether it’s single sided or double sided, we can meet your expectations.
Measurement Evaluation We can assess the quality of shape and surface of the material. (max diameter=150mm)
Shape evaluation

  • Measurement of flatness by interferometric radar,
  • Measurement of curvature by grazing incidence      interferometer etc.
    Surface evaluation
  • Assessment of faults such as dents and scratches by semiconductor inspection microscope
  • Assessment of surface by AFM

PRODUCT MACHINING RESULT

Single crystals Sapphire,SiC,GaN,Diamond,Si,Quartz,AlN,LiTaO3,
LiNbO3,MgF2,CaF2,Ga2O3
Polycrystalline and ceramics Al2O2、AlN、SiN、Zr O2、SiC、Diamond、Glass ceramics
Metals SUS,Al,Cu,Ni,Cemented carbide,Ti,Inver
Resin PC,PMMA, Epoxy,PVC,CFRP

PROCESSING REQUEST

1

Please contact us through “inquiries”.

If you have requests regarding material, shape, quantity, accuracy or delivery schedules, please don’t forget to let us know. If you wish, we can arrange a meeting on/offline to discuss details.

2

Based on the type of material, one of our departments will reach you for confirmation.

3

Submission of official quotation

4

Manufacture process

5

Delivery